Glass Masters
Wall of glass doors opening to the mountains

Doors · Ketchum & Sun Valley

Sliding Door Hard to Open?

Why a sliding glass door starts to drag, what you can check yourself, and when it needs rollers, new glass or a new door.

The short answer

A sliding glass door that drags almost always has a problem at the bottom: a dirty track, worn rollers, or both. Neither one means you need a new door. Fogged glass is a separate problem, and the fix for that is new glass, not a new door either.

Sliders take more use and more weather than any other door in the house. In this valley they also take months of freeze and thaw, grit tracked in from outside, and ice along the bottom edge. Wear shows up here sooner than it would somewhere milder.

What is usually wrong

A dirty track

Grit, pine needles and dried debris in the bottom track are the most common reason a slider drags, and the easiest to fix. In winter, ice and frozen meltwater in the track do the same thing.

Worn rollers

The door rides on rollers in the bottom of the panel. Over years of daily use they wear flat or seize, and the door starts to grind or scrape. Rollers can usually be replaced without replacing the door.

Fog between the panes

If the glass has gone cloudy and you cannot wipe it off, the seal on the insulated glass unit has failed. We replace the glass unit and the frame stays where it is.

What you can check yourself

Clean the track. Vacuum the bottom track, then wipe it out. Clear any ice before you force the door. If the door slides freely after that, the track was the problem.

Watch the bottom of the door as it moves. If it scrapes the track, rides unevenly, or you hear grinding, the rollers are worn or have dropped. That is a repair rather than a cleaning job.

Look at the glass. Haze or condensation between the two panes means the seal has failed. A crack means the pane needs replacing; door glass is tempered by code, so the new pane is made to size.

If the door will not move at all, or the panel has come off the track, stop there. A slider panel is heavy, and lifting it back on is a two-person job. Call the shop.

Questions we get about sliding doors

Can you replace just the glass in a sliding door?

Usually, yes. When the glass fogs or cracks but the frame is sound, we replace the glass unit and keep the door. It is made to size and tempered, as code requires for door glass.

Can you replace the rollers?

In most cases. Bring the details or call and we will tell you what your door needs. Worn rollers are one of the most common slider repairs we see.

Why is it worse in winter?

Ice and frozen grit in the track add drag, and cold shows up wear that a summer hid. Cleaning and clearing the track is the first thing to try.

When is it time for a new door?

When the frame itself has failed, when the door leaks around the frame rather than through the glass, or when you are replacing the whole wall for looks or performance. For that we are an authorized Kolbe dealer, with sliding, multi-slide and lift-and-slide doors.

What about the screen?

Sliding door screens jump the track for the same reasons: worn rollers or a frame out of square. See screen repair, or bring it to the shop.

Getting it fixed

For new glass, the Instant Estimate gives you a ballpark in about a minute: measure the glass, pick the type, and it gives you a range. For rollers and tracks, call the shop and describe what the door is doing, and we will tell you what it needs.

Door still dragging?

Tell us what it is doing

Call the shop for rollers and tracks. For new glass, the estimator gives you a range in about a minute and we confirm it after a free measurement.

Where we work

The whole valley, and over the summit

Our shop is on Lewis Street in Ketchum. We cover the Wood River Valley from the top to the bottom, and the Sawtooth Valley over Galena Summit.

Sawtooth ValleyStanley, Sawtooth City & Smiley Creek, over Galena Summit

Start your project

Repair or replacement? Get a ballpark price in about a minute. Bigger custom project? Request a quote and we'll take it from measurement to final polish.